Build Your Riser
Upload a silhouette, set dimensions, preview, and export.
2. Upload Silhouette
Drop SVG or JSON here
SVG replaces the base shape in the preview and STL export.
JSON restores a saved builder template.
Sample presets and outer-shape SVG files can be loaded from the folders below.
Loaded: Default silhouette
3. Settings
Units
mm
mm
°
Angle Anchor
Choose which side stays fixed while angle changes.
Hole Pattern
This section is for hole-position data. Download the matching SVG files below if you want to inspect the layout.
Use Case
Tip: Increase rear height or angle to reduce wheel bite.
Dimensions
Base
Width
Length
Front
Rear
Angle
Hole Pattern
Silhouette
Need hardware sizing? Use the bolt calculator below for flat or angled risers.
API status: checking...
STL exports the selected base, heights, and hole pattern through the live API. Drop an SVG into the upload area to use a custom base shape, or drop a JSON to restore a saved setup.
Before You Export
Check Hole Spacing
Match your truck bolt pattern before you print a full set.
Confirm Bolt Length
Start with the hardware recommendation in the Dimensions panel, then confirm thread engagement on your deck.
Test Wheel Bite
Increase height or angle if your setup still contacts the deck.
Print & Test Fit
Do a quick fit test before you trust a fresh part on the street.
Printed yours? Tag @riser3d on Instagram — we want to see what you built. #RISER3D